Filip Strniša
Curriculum Vitae
ResearchGate page
Cobiss search
for author
LinkedIn profile
Received his M.Sc. in Chemical Engineering at the University of Ljubljana. He is currently a research assistant at the Department of Communication Systems, Jožef Stefan Institute. Among his research interests are modelling transport phenomena, the lattice Boltzmann method, and parallel computing.
Products
Medusa: coordinate free implementation of meshless methods
Projects
Inertial effects on fluid flow in complex porous media
Decay of an invasive ctenophore blooms as a perturbation to the coastal marine microbial community
Forecasting tap changer regulatory maintenance with advanced analytics
Personal Bibliography
2026
M. Chen, Y. Lu, L. Cheng, R. Zhu, K. Tao, Y. Li, M. Wahab;
Lightweight underwater acoustic time-frequency separation network for efficient marine target recognition, Ocean Engineering, vol. 343, 2026 [DOI: 10.1016/j.oceaneng.2025.123234] ::
M. Chen, Y. Lu, L. Cheng, R. Zhu, K. Tao, Y. Li, M. Wahab;
Lightweight underwater acoustic time-frequency separation network for efficient marine target recognition, Ocean Engineering, vol. 343, 2026 [DOI: 10.1016/j.oceaneng.2025.123234] ::
Q. Xiao, C. Wang, Y. Wu, G. Chen, L. Wang, M. Wahab;
Understanding fretting fatigue in dovetail joints: Slip accumulation, stick-slip evolution, joint angle and crack initiation, Tribology International, vol. 214, 2026 [DOI: 10.1016/j.triboint.2025.111368] ::
P. Hung, H. Nguyen-Xuan, M. Wahab, C. Thai, P. Phung-Van;
Flexoelectricity effects on smart piezoelectric nanoplates using an isogeometric analysis-based Chebyshev shear deformation theory, Computers and Structures, vol. 320, 2026 [DOI: 10.1016/j.compstruc.2025.108033] ::
H. Zahran, A. Zinovev, D. Terentyev, A. Aouf, M. Wahab;
A deep learning approach to predict cyclic softening behaviour of irradiated and non-irradiated RAFM steels under low cycle fatigue, European Journal of Mechanics / A Solids, vol. 117, 2026 [DOI: 10.1016/j.euromechsol.2026.106021] ::
Y. Zhang, D. Chen, Y. Wu, L. Wang, M. Wahab;
Cross-configuration assessment of functionally graded adhesives in single-lap joints via an elastoplastic ductile-damage framework, International Journal of Adhesion and Adhesives, vol. 147, 2026 [DOI: 10.1016/j.ijadhadh.2026.104285] ::
C. Thai, P. Hung, M. Wahab, P. Phung-Van;
Isogeometric evaluation of higher-order shear deformation theories for functionally graded magneto-electro-elastic nanoplates under nonlocal strain gradient elasticity, Engineering Analysis with Boundary Elements, vol. 188, 2026 [DOI: 10.1016/j.enganabound.2026.106745] ::
Y. Ma, Q. Yang, R. Zhu, Y. Li, M. Wahab;
Underwater Image Enhancement Via Dual-Path Frequency-Domain Fusion Network, IEEE Transactions on Circuits and Systems for Video Technology, 2026 [DOI: 10.1109/TCSVT.2026.3676253] ::
Y. Lu, Z. Zhu, Y. Li, H. Liu, J. Hou, C. Zhou, M. Wahab;
LDS-former: A lightweight dual-stream transformer for real-time acoustic emission monitoring of crack evolution in offshore steel structures, Advanced Engineering Informatics, vol. 74, 2026 [DOI: 10.1016/j.aei.2026.104635] ::
M. Wahab;
Ballistic performance of a novel auxetic core in sandwich structures under impact loading, Jnl of Sandwich Structures & Materials, 2026 ::
Z. Wang, J. Liu, K. Li, X. Fang, M. Wahab, Z. Cai;
Combined laser shock peening and shot peening for improving fretting wear and low-cycle fatigue performance of Ti-6Al-4V, Optics and Laser Technology, vol. 203, 2026 [DOI: 10.1016/j.optlastec.2026.115900] ::
2025
F. Strniša, M. Jančič, G. Kosec;
Numerical analysis of small-strain elasto-plastic deformation using local radial basis function approximation with Picard iteration, Applied mathematical modelling, vol. 137, 2025 [DOI: 10.1016/j.apm.2024.115714][COBISS: 208700163] ::
L. Pušlar, U. Rozman, J. Novak, F. Strniša, G. Kalčíková, M. Depolli;
Non-destructive phenotyping of duckweed using segment anything model, 2025 MIPRO : 48th ICT and Electronics Convention, 2025 [DOI: 10.1109/MIPRO65660.2025.11132002][COBISS: 248256259]
M. Vodopivec, F. Strniša, G. Kosec, T. Lovato;
Coupling CROCO with the Biogeochemical Flux Model (BFM) to simulate the Adriatic Sea ecosystem dynamics, CROCO User Meeting 2025 : Marseille, 29th Sept. to 2nd Oct. 2025, 2025 [COBISS: 262966787]
S. Qin, J. Huang, S. Li, Y. Zhou, M. Wahab;
Novel two-stage adaptive weight coefficients for Finite Element Model Updating of a cable-stayed bridge via sensitivity analysis and Kriging model, Mechanical Systems and Signal Processing, vol. 231, 2025 [DOI: 10.1016/j.ymssp.2025.112674] ::
L. Ho, T. Bui-Tien, M. Wahab;
A two-step failure identification approach using a stochastic optimization-based ensemble learning model for beams without pristine data, Engineering Structures, vol. 334, 2025 [DOI: 10.1016/j.engstruct.2025.120253] ::
Q. Xiao, C. Wang, B. Ahmed, D. Wang, Z. Cai, L. Wang, M. Wahab;
Prediction of fretting fatigue lifetime of dovetail joints using a Modified Theory of Critical Distances, Tribology International, vol. 209, 2025 [DOI: 10.1016/j.triboint.2025.110728] ::
C. Li, S. Han, C. Wang, A. Amanov, L. Wang, M. Wahab;
A multiscale finite element approach to analyse the effect of shot peening-induced surface roughness on fretting fatigue crack initiation, Results in Engineering, vol. 26, 2025 [DOI: 10.1016/j.rineng.2025.104998] ::
X. Fang, Z. Wang, M. Wahab, J. Gong, X. Liu, X. Liu, Z. Cai;
Fretting wear mechanism of GH4169 dovetail joint specimens treated with hybrid laser shock peening, Tribology International, vol. 209, 2025 [DOI: 10.1016/j.triboint.2025.110740] ::
J. Liu, X. Wang, A. Zinovev, D. Terentyev, L. Wang, M. Wahab;
A modified low cycle fatigue Chaboche model for irradiation hardening behaviour of EUROFER97 at elevated temperatures, European Journal of Mechanics / A Solids, vol. 114, 2025 [DOI: 10.1016/j.euromechsol.2025.105737] ::
Y. Guo, G. Kosec, L. Wang, M. Wahab;
A Transfer Learning method for deep drawing force prediction of sheet metal, European Journal of Mechanics / A Solids, vol. 114, 2025 [DOI: 10.1016/j.euromechsol.2025.105780] ::
Y. Zhou, F. Yao, Y. Wang, C. Bai, S. Liu, M. Wahab;
Free vibration of orthotropic rectangular mindlin plates via spectral element model under arbitrary boundary conditions, Thin-Walled Structures, vol. 216, 2025 [DOI: 10.1016/j.tws.2025.113679] ::
C. Wang, Q. Xiao, Y. Guo, G. Chen, L. Wang, M. Wahab;
Fretting fatigue crack propagation lifetime estimation using Long Short-Term Memory network, Engineering Fracture Mechanics, vol. 327, 2025 [DOI: 10.1016/j.engfracmech.2025.111420] ::
H. Zahran, A. Zinovev, D. Terentyev, A. Aouf, M. Wahab;
Low cycle fatigue life prediction for neutron-irradiated and nonirradiated RAFM steels via machine learning, Fusion Engineering and Design, vol. 221, 2025 [DOI: 10.1016/j.fusengdes.2025.115394] ::
A. Milan, M. Ayatollahi, R. Faal, M. Wahab;
Mixed-mode problem of multiple interacting embedded and edge cracks in a piezoelectric strip under in-plane electro-mechanical loadings, Acta Mechanica, 2025 [DOI: 10.1007/s00707-025-04465-9] ::
I. Katili, S. Natarajan, M. Wahab, S. Widyatmoko;
DSQK finite element with assumed orthogonality bending energy and mixed transverse shear strains for thermal buckling analysis of three-layer functionally graded sandwich plates, Composite Structures, vol. 372, 2025 [DOI: 10.1016/j.compstruct.2025.119615] ::
Z. Han, Y. Li, M. Wahab;
Polynomial chaos expansion-driven Bayesian inference for multi-parameter identification of large-span curved footbridge, Structures, vol. 80, 2025 [DOI: 10.1016/j.istruc.2025.110035] ::
B. Ahmed, C. Wang, D. Wang, Y. Zhou, L. Wang, M. Wahab;
Fretting fatigue crack initiation behaviour of Ti-6Al-4V and IN-100 alloys at elevated temperatures, International Journal of Solids and Structures, vol. 322, 2025 [DOI: 10.1016/j.ijsolstr.2025.113633] ::
J. Yuan, Y. Zhou, Y. Zhang, M. Wahab;
A large-stroke and adjustable-load magnetic quasi-zero stiffness isolator, Mechanical Systems and Signal Processing, vol. 239, 2025 [DOI: 10.1016/j.ymssp.2025.113326] ::
P. Hung, M. Wahab, P. Phung-Van, C. Thai;
A refined size-dependent modified strain gradient analysis of graphene platelet-reinforced functionally graded triply periodic minimal surface microplates using isogeometric analysis, Engineering Analysis with Boundary Elements, vol. 180, 2025 [DOI: 10.1016/j.enganabound.2025.106442] ::
X. Zhang, Q. Zhao, H. Zhang, Z. Zhai, X. Chen, Y. Hu, Z. Han, N. Zhang, Y. Gui, M. Wahab;
Crystal plasticity-based intergranular facture simulation of AA 5083 aluminum alloy for tri-junction grain boundary, International Journal of Fracture, 2025 [DOI: 10.1007/s10704-025-00892-w] ::
2024
F. Strniša, T. Tinta, G. Herndl, G. Kosec;
Dynamic population modeling of Bacterioplankton community response to gelatinous marine zooplankton bloom collapse and its impact on marine nutrient balance, Progress in oceanography, vol. 227, 2024 [DOI: 10.1016/j.pocean.2024.103312][COBISS: 202508291]
2023
F. Strniša, M. Vodopivec, G. Kosec;
Computational performance aspects of CROCO-BFM coupling, Proceedings of the International Convention MIPRO : 46th MIPRO ICT and Electronics Convention (MIPRO), 2023 [COBISS: 153597955]
2022
F. Strniša, M. Jančič, G. Kosec;
A meshless solution of a small-strain plasticity problem, 2022 45th Jubilee International Convention on Information, Communication and Electronic Technology (MIPRO) : May 23-27, 2022, Opatija, Croatia, 2022 [DOI: 10.23919/MIPRO55190.2022.9803585][COBISS: 114153987]
M. Jančič, F. Strniša, G. Kosec;
Implicit-explicit error indicator based on approximation order, 7th Multidisciplinary Conference on Computer and Energy Science, (SpliTech), hybrid, 5-8 July 2022, Split, Croatia, 2022 [COBISS: 118739203]
F. Strniša, M. Jančič, G. Kosec;
Meshless simulation of infinitesimal elastoplastic deformation of a 3D body, Proceedings of the Fourteenth International Conference on Computational Structures Technology : 23-25 August, 2022, Montpellier, 2022 [COBISS: 141486595]
M. Vodopivec, F. Strniša, G. Kosec;
Coupling the Coastal and Regional Ocean COmmunity model (CROCO) with the Biogeochemical Flux Model (BFM), EGU General Assembly 2022 : Vienna, Austria & Online, 2022 [DOI: 10.5194/egusphere-egu22-4666][COBISS: 113845507]
F. Strniša, I. Plazl, T. Urbič, A. Pohar, J. Reščič, B. Zelić;
Večnivojsko modeliranje kemijskih in biokemijskih procesov v mikrofluidnih napravah = Multiscale modelling of chemical and biochemical processes in microfluidic devices : doktorska disertacija, 2022 [COBISS: 108519683]
2021
F. Strniša, T. Vikram Sagar, P. Djinović, A. Pintar, I. Plazl;
Ni-containing CeO [sub] 2 rods for dry reforming of methane : activity tests and a multiscale lattice Boltzmann model analysis in two model geometries, Chemical engineering journal, 2021 [DOI: 10.1016/j.cej.2020.127498][COBISS: 34724867]
F. Strniša, G. Kosec;
A model for jellyfish detritus decay through microbial processing, MIPRO 2021 : 44th International Convention, September 27 - October 1, 2021, Opatija, Croatia, MIPRO ..., 2021 [COBISS: 85504771]
2020
F. Strniša, P. Žnidaršič Plazl, I. Plazl;
Lattice Boltzmann modeling-based design of a membrane-free liquid-liquid microseparator, Chemical and biochemical engineering quarterly, vol. 34, 2020 [DOI: 10.15255/CABEQ.2020.1781][COBISS: 24458755]
F. Strniša, T. Urbič, I. Plazl;
A lattice Boltzmann study of 2D steady and unsteady flows around a confined cylinder, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 42, 2020 [DOI: 10.1007/s40430-020-2176-y][COBISS: 1538517699]
T. Vikram Sagar, F. Strniša, P. Djinović, I. Plazl, A. Pintar;
A comprehensive study of catalysis and multiscale modelling of dry methane reforming over Ni/CeO2-R catalyst, Engineering materials for catalysis : book of abstracts, 2020 [COBISS: 31185923]
2019
F. Strniša, T. Urbič, P. Žnidaršič Plazl, I. Plazl;
Process intensification and miniaturization of chemical and biochemical processes : [lecture], 29th European Symposium on Computer Aided Process Engineering : [ESCAPE29, Eidhoven, June 16th to 19th, 2019], 2019 [DOI: 10.1016/B978-0-12-818634-3.50301-5][COBISS: 1538384067]
F. Strniša, T. Vikram Sagar, P. Djinović, I. Plazl, A. Pintar;
Lattice boltzmann modeling of a packed-bed microreactor for the methane dry reforming, Zbornik povzetkov, 2019 [COBISS: 40218117]
2018
F. Strniša, M. Bajić, P. Panjan, I. Plazl, A. Sesay, P. Žnidaršič Plazl;
Characterization of an enzymatic packed-bed microreactor : experiments and modeling, Chemical engineering journal, 2018 [DOI: 10.1016/j.cej.2018.05.028][COBISS: 1537783747]
F. Strniša, T. Urbič, P. Žnidaršič Plazl, I. Plazl;
Complex flows in microfluidic devices : model verification and validation : [lecture], IMRET 2018 : book of abstracts, 2018 [COBISS: 1538010051]
2017
F. Strniša, M. Bajić, P. Panjan, T. Urbič, P. Žnidaršič Plazl, A. Sesay, I. Plazl;
Experimental and theoretical evaluation of residence time distribution in miniaturized packed bed reactors with Novozym [sup] R 435 : [poster spotlight], Book of extended abstracts, 2017 [COBISS: 1537424067]
D. Valikhani, J. Bolivar, F. Strniša, D. McIlroy, P. Žnidaršič Plazl, B. Nidetzky;
Use of silica nanosprings and electrospun nanofibers for the development of wall-coated enzyme microreactors, Book of extended abstracts, 2017 [COBISS: 1537422019]
G. Kalčíková, A. Jurinjak Tušek, F. Strniša, B. Zelić, P. Žnidaršič Plazl;
Book of extended abstracts, 2017 [COBISS: 289818112]
2016
T. Urbič, I. Plazl, A. Prašnikar, F. Strniša;
Multiscale modeling concept at the micro scale, ESCAPE 26, 2016 [COBISS: 1537010883]
F. Strniša, I. Plazl, T. Urbič;
Uporaba mrežne Boltzmannove metode za modeliranje transportnih pojavov v mikrofluidnih napravah : magistrsko delo, 2016 [COBISS: 1537133763]
2015
F. Strniša, I. Plazl, T. Urbič;
Simulacija tokov z mrežno Boltzmannovo metodo = Simulation of flows using the Lattice Boltzmann method, Zbornik referatov in povzetkov, 2015 [COBISS: 1536638403]
F. Strniša, I. Plazl, T. Urbič;
Simulation of flows using the Lattice Boltzmann method, Implementation of microreactor technology in biotechnology : book of extended abstracts, 2015 [COBISS: 1536303811]
K. Kržišnik, J. Aupič, P. Papež, M. Dlouhy, A. Šinkovec, I. Pribec, F. Strniša, A. Prašnikar, M. Komavec, E. Slejko, T. Urbič, M. Lubej;
Uporaba računalniških orodij pri načrtovanju in optimizaciji procesov v kemiji in kemijskem inženirstvu : končno poročilo o izvedenih projektnih aktivnostih : projekt Po kreativni poti do praktičnega znanja, Javni sklad Republike Slovenije za razvoj kadrov in štipendije, za obdobje od 1. 2. 2015 do 31. 7. 2015, 2015 [COBISS: 1536851907]
2014
F. Strniša, I. Plazl;
Mezo nivo modeliranja procesov v mikrosistemih : diplomsko delo, 2014 [COBISS: 1536075459]