Revision as of 09:57, 30 November 2017

Intro

The classical de Vahl Davis benchmark test is defined for the natural convection of the air ($\Pr =0.71$) in the square closed cavity (${{\text{A}}_{\text{R}}}=1$). The only physical free parameter of the test remains the thermal Rayleigh number. In the original paper [1] de Vahl Davis tested the problem up to the Rayleigh number ${{10}^{6}}$, however in the latter publications, the results of more intense simulations were presented with the Rayleigh number up to ${{10}^{8}}$. Lage and Bejan [2] showed that the laminar domain of the closed cavity natural convection problem is roughly below $\text{Gr1}{{\text{0}}^{9}}$. It was reported [3, 4] that the natural convection becomes unsteady for $\text{Ra}=2\cdot {{10}^5}$. Here we present a MLSM solution of the case.

\begin{equation} \text{Ra}\text{=}\,\frac{\left| \mathbf{g} \right|{{\beta }_{T}}\left( {{T}_{H}}-{{T}_{C}} \right){{\Omega }_{H}}^{3}{{\rho }^{2}}{{c}_{p}}}{\lambda \mu } \end{equation} \begin{equation} \text{Pr}=\frac{\mu {{c}_{p}}}{\lambda } \end{equation}

[1] de Vahl Davis G. Natural convection of air in a square cavity: a bench mark numerical solution. Int J Numer Meth Fl. 1983;3:249-64.

[2] Lage JL, Bejan A. The Ra-Pr domain of laminar natural convection in an enclosure heated from the side. Numer Heat Transfer. 1991;A19:21-41.

[3] Janssen RJA, Henkes RAWM. Accuracy of finite-volume disretizations for the bifurcating natural-convection flow in a square cavity. Numer Heat Transfer. 1993;B24:191-207.

[4] Nobile E. Simulation of time-dependent flow in cavities with the additive-correction multigrid method, part II: Apllications. Numer Heat Transfer. 1996;B30:341-50.

. Figure 1: Scheme of the de Vahl Davis benchmark test

Code

The snippet of the openMP parallel MLSM code for an explicit ACM method with CBS looks like: (full examples, including implicit versions, can be found under the examples in the code repository Main Page).

    v2[boundary] = vec_t{0.0, 0.0};
    T2[left] = O.T_cold;
    T2[right] = O.T_hot;
    //Time stepping
    for (int step = 0; step <= O.t_steps; ++step) {
        for (int i_count = 1; i_count < _MAX_ITER_; ++i_count) {
            // Navier Stokes
            for (auto c : interior) {
                v2[c] = v1[c] + O.dt * (-1 / O.rho * op.grad(P1, c)
                                        + O.mu / O.rho * op.lap(v1, c)
                                        - op.grad(v1, c) * v1[c]
                                        + O.g * (1 - O.beta * (T1[c] - O.T_ref)));
            }

            //Speed of sound
            Range<scal_t> norm = v2.map([](const vec_t& p) { return p.norm(); });
            scal_t C = O.dl * std::max(*std::max_element(norm.begin(), norm.end()), O.v_ref);
            // Mass continuity
            Range<scal_t> div_v;
            for (auto c:all) {
                div_v[c] = op.div(v2, c);
                P2[c] = P1[c] - C * C * O.dt * O.rho * div_v[c] +
                        O.dl2 * C * C * O.dt * O.dt * op.lap(P1, c);
            }
            P1.swap(P2);
        }

        //heat transport
        for (auto c : interior) {
            T2[c] = T1[c] + O.dt * O.lam / O.rho / O.c_p * op.lap(T1, c) -
                    O.dt * v1[c].transpose() * op.grad(T1, c);
        }
        for (auto c : top) T2[c] = op.neumann(T2, c, vec_t{0, -1}, 0.0);
        for (auto c : bottom) T2[c] = op.neumann(T2, c, vec_t{0, 1}, 0.0);
    }

Results

In below galley you can find temperature contour plots, velocity magnitude contour plots, v_max and average hot side Nusselt number convergence behavior. The reference values are from:

• [a] de Vahl Davis G. Natural convection of air in a square cavity: a bench mark numerical solution. Int J Numer Meth Fl. 1983;3:249-64.
• [b] Sadat H, Couturier S. Performance and accuracy of a meshless method for laminar natural convection. Numer Heat Transfer. 2000;B37:455-67.
• [c] Wan DC, Patnaik BSV, Wei GW. A new benchmark quality solution for the buoyancy-driven cavity by discrete singular convolution. Numer Heat Transfer. 2001;B40:199-228.
• [d] Šarler B. A radial basis function collocation approach in computational fluid dynamics. CMES-Comp Model Eng. 2005;7:185-93.
• [e] Kosec G, Šarler B. Solution of thermo-fluid problems by collocation with local pressure correction. Int J Numer Method H. 2008;18:868-82.