Magd Abdel Wahab
Personal homepage
Curriculum Vitae
ResearchGate page
Google Scholar page
Cobiss search
for author
Obtained his PhD in fracture mechanics from the KU Leuven in Belgium. His research interests are mainly in the fields of applied mechanics, fracture mechanics and structural dynamics of structures with emphasis on the detection and assessment of damage, the investigation of long-term durability and failure mechanisms and the analysis of fractures using various numerical methods
Personal Bibliography
2024
Z. Xue, Y. Liu, M. Abdel Wahab;
A meshfree method for the nonlinear KdV equation using stabilized collocation method and gradient reproducing kernel approximations, Engineering analysis with boundary elements, 2024 [DOI: 10.1016/j.enganabound.2024.105752][COBISS: 196072707]
Z. Xue, L. Wang, X. Ren, M. Abdel Wahab;
Weighted radial basis collocation method for large deformation analysis of rubber-like materials, Engineering analysis with boundary elements, 2024 [DOI: 10.1016/j.enganabound.2023.11.016][COBISS: 200146691]
S. Qin, J. Feng, J. Tang, M. Abdel Wahab;
Condition assessment of a concrete filled steel tube arch bridge using in-situ vibration measurements and an Improved Artificial Fish Swarm Algorithm, Computers & Structures, vol. 291, 2024 [DOI: 10.1016/j.compstruc.2023.107213][COBISS: 200155907]
C. Wang, Q. Zhao, D. Wang, L. Wang, M. Abdel Wahab;
Fretting fatigue crack initiation and propagation behaviours of Ti6Al4V alloy coated by functionally graded material, Composite structures, vol. 343, 2024 [DOI: /10.1016/j.compstruct.2024.118285][COBISS: 199639299]
K. Zemani, A. May, M. Abdel Wahab, H. Slamani;
Numerical analysis of an experimental ballistic test of Al/SiC functionally graded materials, Composite structures, 2024 [DOI: 10.1016/j.compstruct.2024.117909][COBISS: 200109059]
M. Shirazi, S. Khatir, D. Boutchicha, M. Abdel Wahab;
Feature extraction and classification of multiple cracks from raw vibrational responses of composite beams using 1D-CNN network, Composite structures, 2024 [DOI: 10.1016/j.compstruct.2023.117701][COBISS: 200153091]
M. Ayatollahi, S. Moein Hashemi, M. Abdel Wahab;
Transient analysis of a cracked functionally graded magneto-electro-elastic rectangular finite plane under anti-plane mechanical and in-plane electric and magnetic impacts, Fatigue & fracture of engineering materials & structures, vol. 47, 2024 [DOI: 10.1111/ffe.14174][COBISS: 200951043]
Y. Liu, Z. Xue, L. Wang, M. Abdel Wahab;
A gradient reproducing kernel based stabilized collocation method for the 5th order Korteweg–de Vries equations, Wave motion : an International Journal Reporting Research on Wave Phenomena, vol. 128, 2024 [DOI: 10.1016/j.wavemoti.2024.103308][COBISS: 196438787]
B. Wang, D. Wang, J. Ye, L. Tang, H. Chong, M. Abdel Wahab;
Effect of fatigue load on the bending tribo-corrosion-fatigue behaviors between the main cable wires, Friction, 2024 [DOI: 10.1007/s40544-023-0830-y][COBISS: 196421379]
K. Fan, D. Liu, C. Wang, M. Abdel Wahab;
Effect of contact stress and slip amplitude on fretting fatigue behaviour of ultrasonic surface nanocrystallized TC11 titanium alloy, Journal of materials research and technology, 2024 [DOI: 10.1016/j.jmrt.2024.01.020][COBISS: 200134659]
T. Sang-To, T. Huynh, S. Khatir, M. Abdel Wahab, T. Cuong-Le;
A nonlinear optimization method for calibration of large-scale deep cement mixing in very soft clay deep excavation, International journal for numerical and analytical methods in geomechanics, vol. 48, 2024 [DOI: 10.1002/nag.3714.][COBISS: 196986883]
G. Wang, Y. Peng, X. Chang, K. Huang, C. Li, M. Imran, M. Abdel Wahab;
Effect of corrosion on fretting wear morphology and mechanical behaviors of wires, Tribology international, 2024 [DOI: 10.1016/j.triboint.2024.109939][COBISS: 201336067]
S. Han, N. Yang, L. Wang, M. Abdel Wahab;
Modelling of microscopic crack initiation behaviour of fretting fatigue based on X-ray micro-computed tomography scan, International journal of fatigue, 2024 [DOI: 10.1016/j.ijfatigue.2024.108374][COBISS: 195959811]
G. Wang, Y. Peng, Z. Zhu, X. Chang, C. Li, M. Imran, M. Abdel Wahab;
Fretting wear behaviour of high strength alloy steel induced by plasma nitriding and post-oxidation, Tribology international, 2024 [DOI: 10.1016/j.triboint.2024.109732][COBISS: 195948803]
K. Fan, D. Liu, Y. Liu, H. Zhang, X. Zhang, M. Li, Y. Li, M. Abdel Wahab;
Enhanced fretting fatigue strength of TC11 titanium alloy using laser-assisted ultrasonic surface rolling process, Tribology international, vol. 195, 2024 [DOI: 10.1016/j.triboint.2024.109619][COBISS: 196445187]
S. Han, N. Yang, Q. Zhao, Y. Zhou, L. Wang, M. Abdel Wahab;
Prediction of fretting fatigue lifetime of aluminium alloy treated with Friction Stir Processing using continuum damage mechanics, Tribology international, vol. 195, 2024 [DOI: 10.1016/j.triboint.2024.109659][COBISS: 196410627]
N. Molina, L. Vanegas-Useche, C. Mesa, C. Wang, L. Wang, M. Abdel Wahab;
Fretting fatigue crack nucleation analysis under a variable coefficient of friction, Tribology international, vol. 194, 2024 [DOI: 10.1016/j.triboint.2024.109558][COBISS: 196963587]
C. Li, A. Amanov, C. Wang, L. Wang, M. Abdel Wahab;
Effect of laser shock peening on fretting wear behaviour of AISI 304 stainless alloy, Tribology international, 2024 [DOI: 10.1016/j.triboint.2024.109386][COBISS: 197751043]
C. Wang, K. Fan, Q. Zhao, M. Abdel Wahab;
Effect of shot peening parameters on fretting fatigue lifetime, Tribology international, 2024 [DOI: 10.1016/j.triboint.2024.109311][COBISS: 200117763]
P. Phung-Van, H. Nguyen-Xuan, P. Hung, M. Abdel Wahab, C. Thai;
Nonlocal Strain Gradient Analysis of Honeycomb Sandwich Nanoscale Plates, Thin-Walled Structures, 2024 [DOI: 10.1016/j.tws.2024.111746][COBISS: 197747971]
J. Bai, H. Nguyen-Xuan, E. Atroshchenko, G. Kosec, L. Wang, M. Abdel Wahab;
Blood-sucking leech optimizer, Advances in engineering software, vol. 195, 2024 [DOI: 10.1016/j.advengsoft.2024.103696][COBISS: 199092739]
K. Fan, D. Liu, J. Yang, M. Abdel Wahab;
Thermal relaxation of compressive residual stresses in surface gradient nanostructure of TC11 titanium alloy, Journal of alloys and compounds, 2024 [COBISS: 200977411]
Z. Zhou, C. Tian, W. Dong, M. Abdel Wahab, Z. Chen;
Enhanced toughness and ductility of T91 steel after exposure to liquid LBE saturated by oxygen at 350–500 °C, Journal of materials research and technology, 2024 [DOI: 10.1016/j.jmrt.2024.04.230][COBISS: 195976963]
H. Zahran, A. Zinovev, D. Terentyev, X. Wang, M. Abdel Wahab;
Experimental investigation and constitutive material modelling of low cycle fatigue of EUROFER97 for fusion applications, Journal of nuclear materials, 2024 [DOI: 10.1016/j.jnucmat.2023.154809][COBISS: 200971011]
S. Qin, J. Tang, J. Feng, M. Abdel Wahab;
Modal parameter identification in civil structures via Hilbert transform ensemble with improved empirical wavelet transform, Journal of vibration and control, vol. 30, 2024 [DOI: 10.1177/10775463231166428][COBISS: 200990723]
Q. Zhao, Y. Qu, Z. Liu, H. Ke, S. Jiang, X. Wang, C. Duan, Z. Zhai, M. Abdel Wahab;
Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by Brass texture, Materials Science & Engineering. A, Structural materials: Properties, Microstructure and Processing, vol. 899, 2024 [DOI: 10.1016/j.msea.2024.146445][COBISS: 196429827]
L. Nguyen-Ngoc, Q. Nguyen-Huu, M. Abdel Wahab;
Deep neural network and evolved optimization algorithm for damage assessment in a truss bridge, Mathematics, vol. 12, 2024 [DOI: 10.3390/math12152300][COBISS: 202614019]
Y. Li, H. Minh, M. Cao, X. Qian, M. Abdel Wahab;
An integrated surrogate model-driven and improved termite life cycle optimizer for damage identification in dams, Mechanical systems and signal processing, 2024 [DOI: 10.1016/j.ymssp.2023.110986][COBISS: 199932675]
G. Wang, Y. Peng, Z. Zhu, M. Abdel Wahab;
A multi-physics coupling analysis to predict stress corrosion characteristics of wires in rope under wear damage, Simulation modelling practice and theory, 2024 [DOI: 10.1016/j.simpat.2023.102882][COBISS: 200141315]
Q. Zhao, M. Abdel Wahab, Y. Ling, Z. Liu, D. Wang;
Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model, Engineering fracture mechanics, 2024 [DOI: 10.1016/j.engfracmech.2023.109819][COBISS: 197744899]
A. Oulad Brahim, R. Capozucca, T. Cuong-Le, M. Abdel Wahab;
Artificial neural network and YUKI algorithm for notch depth prediction in X70 steel specimens, Theoretical and applied fracture mechanics, 2024 [DOI: 10.1016/j.tafmec.2023.104227][COBISS: 200127491]
M. Imran, D. Wang, Y. Zhou, L. Wang, M. Abdel Wahab;
Simulation of fretting wear in steel wires under variable coefficient of friction and variable wear coefficient, Simulation modelling practice and theory, vol. 134, 2024 [DOI: 10.1016/j.simpat.2024.102959][COBISS: 199089411]
2023
C. Wang, K. Pereira, D. Wang, M. Abdel Wahab;
Fretting fatigue crack propagation under out-of-phase loading conditions using extended maximum tangential stress criterion, Tribology international, 2023 [DOI: 10.1016/j.triboint.2023.108738][COBISS: 201231619]
S. Han, S. Khatir, M. Abdel Wahab;
A deep learning approach to predict fretting fatigue crack initiation location, Tribology international, 2023 [DOI: 10.1016/j.triboint.2023.108528][COBISS: 201377027]
S. Han, S. Khatir, C. Wang, M. Abdel Wahab;
An Improved Artificial Neural Network for the Direct Prediction of Fretting Fatigue Crack Initiation Lifetime, Tribology international, 2023 [DOI: 10.1016/j.triboint.2023.108411][COBISS: 201297155]
M. Zheng, Z. Liu, M. Abdel Wahab, C. Li;
Degradation and failure analysis of bolted joints under transverse loading, Tribology international, 2023 [DOI: 10.1016/j.triboint.2022.108140][COBISS: 201828611]
V. Tran, H. Nguyen-Xuan, M. Abdel Wahab;
Vibration and buckling optimization of functionally graded porous microplates using BCMO-ANN algorithm, Thin-Walled Structures, vol. 182, part b, 2023 [DOI: 10.1016/j.tws.2022.110267][COBISS: 202086915]
C. Wang, L. Li, A. Zinovev, M. Abdel Wahab;
Estimation of fretting fatigue lifetime in heterogeneous material based on microstructure characterization and multi-scale homogenization, Theoretical and applied fracture mechanics, 2023 [DOI: 10.1016/j.tafmec.2023.103949][COBISS: 201348611]
A. Amanov, R. Karimbaev, C. Li, M. Abdel Wahab;
Effect of surface modification technology on mechanical properties and dry fretting wear behavior of Inconel 718 alloy fabricated by laser powder-based direct energy deposition, Surface & coatings technology, 2023 [DOI: 10.1016/j.surfcoat.2022.129175][COBISS: 201774083]
H. Minh, S. Khatir, R. Rao, M. Abdel Wahab, T. Cuong-Le;
A variable velocity strategy particle swarm optimization algorithm (VVS-PSO) for damage assessment in structures, Engineering with computers, 2023 [DOI: 10.1007/s00366-021-01451-2][COBISS: 202619907]
P. Ghannadi, S. Khatir, S. Kourehli, M. Abdel Wahab;
Finite element model updating and damage identification using semi-rigidly connected frame element and optimization procedure : an experimental validation, Structures, 2023 [COBISS: 201552899]
K. Fan, D. Liu, Y. Liu, J. Wu, M. Abdel Wahab;
Competitive effect of residual stress and surface roughness on the fatigue life of shot peened S42200 steel at room and elevated temperature, Tribology international, 2023 [DOI: 10.1016/j.triboint.2023.108422][COBISS: 201507843]
H. Minh, T. Sang-To, S. Khatir, M. Abdel Wahab, A. Gandomi, T. Cuong-Le;
Augmented deep neural network architecture for assessing damage severity in 3D concrete buildings under temperature fluctuations based on K-means optimization, Structures, 2023 [DOI: 10.1016/j.istruc.2023.105278][COBISS: 201142019]
T. Sang-To, H. Minh, M. Abdel Wahab, T. Cuong-Le;
A new metaheuristic algorithm : Shrimp and Goby association search algorithm and its application for damage identification in large-scale and complex structures, Advances in engineering software, 2023 [DOI: 10.1016/j.advengsoft.2022.103363][COBISS: 201831683]
D. Nguyen, M. Abdel Wahab;
Damage detection in slab structures based on two-dimensional curvature mode shape method and Faster R-CNN, Advances in engineering software, 2023 [DOI: 10.1016/j.advengsoft.2022.103371][COBISS: 201815555]
H. Minh, T. Sang-To, S. Khatir, M. Abdel Wahab, T. Cuong-Le;
Damage identification in high-rise concrete structures using a bio-inspired meta-heuristic optimization algorithm, Advances in engineering software, 2023 [DOI: 10.1016/j.advengsoft.2022.103399][COBISS: 198649347]
M. Imran, D. Wang, M. Abdel Wahab;
Three-dimensional finite element simulations of fretting wear in steel wires used in coal mine hoisting system, Advances in engineering software, 2023 [DOI: 10.1016/j.advengsoft.2023.103499][COBISS: 198640387]
Y. Li, M. Cao, H. Tran-Ngoc, M. Abdel Wahab;
Metamodel-assisted hybrid optimization strategy for model updating using vibration response data, Advances in engineering software, 2023 [DOI: 10.1016/j.advengsoft.2023.103515][COBISS: 201238275]
H. Chong, D. Wang, B. Wang, X. Shen, M. Abdel Wahab;
Gradual deterioration behavior of the load-bearing strength of main cable wires in a suspension bridge, Applied sciences, vol. 13, 2023 [DOI: 10.3390/app13010129][COBISS: 201388035]
E. Ghandourah, S. Khatir, E. Banoqitah, M. Abdel Wahab;
Enhanced ANN predictive model for composite pipes subjected to low-velocity impact loads, Buildings, vol. 13, 2023 [DOI: 10.3390/buildings13040973][COBISS: 201483267]
M. Shirazi, S. Khatir, M. Abdel Wahab;
Damage assessment in laminated composite plates using modal Strain Energy and YUKI-ANN algorithm, Composite structures, 2023 [DOI: 10.1016/j.compstruct.2022.116272][COBISS: 201838595]
A. Oulad Brahim, I. Belaidi, S. Khatir, M. Abdel Wahab;
Strength prediction of a steel pipe having a hemi-ellipsoidal corrosion defect repaired by GFRP composite patch using artificial neural network, Composite structures, 2023 [DOI: 10.1016/j.compstruct.2022.116299][COBISS: 201833731]
N. Fahem, I. Belaidi, A. Oulad Brahim, M. Abdel Wahab;
Prediction of resisting force and tensile load reduction in GFRP composite materials using artificial neural network-enhanced Jaya algorithm, Composite structures, 2023 [DOI: 10.1016/j.compstruct.2022.116326][COBISS: 204992003]
A. Zara, I. Belaidi, M. Abdel Wahab;
Damage detection in GFRP composite structures by improved artificial neural network using new optimization techniques, Composite structures, 2023 [DOI: 10.1016/j.compstruct.2022.116475][COBISS: 201821699]
H. Nguyen-Ngoc, T. Cuong-Le, D. Nguyen, M. Abdel Wahab;
Three-dimensional polyhedral finite element method for the analysis of multi-directional functionally graded solid shells, Composite structures, 2023 [DOI: 10.1016/j.compstruct.2022.116538][COBISS: 201208323]
Y. Li, M. Cao, H. Tran-Ngoc, S. Khatir, M. Abdel Wahab;
Multi-parameter identification of concrete dam using polynomial chaos expansion and slime mould algorithm, Computers & Structures, 2023 [DOI: 10.1016/j.compstruc.2023.107018][COBISS: 201504259]
M. Zheng, Y. Li, C. Wang, J. Bai, M. Abdel Wahab;
Prediction of contact stress in bolted joints using the Polynomial Chaos-Kriging model, Engineering failure analysis, 2023 [DOI: 10.1016/j.engfailanal.2023.107646][COBISS: 201131779]
C. Wang, D. Wang, M. Abdel Wahab;
Fretting fatigue lifetime estimation for heterogeneous material using critical distance with mesh control, Engineering fracture mechanics, 2023 [DOI: 10.1016/j.engfracmech.2023.109092][COBISS: 201743363]
Y. Li, H. Minh, S. Khatir, T. Sang-To, T. Cuong-Le, M. Cao, M. Abdel Wahab;
Structure damage identification in dams using sparse polynomial chaos expansion combined with hybrid K-means clustering optimizer and genetic algorithm, Engineering structures, 2023 [DOI: 10.1016/j.engstruct.2023.115891][COBISS: 200129539]
K. Nguyen, T. Cuong-Le, H. Nguyen-Xuan, M. Abdel Wahab;
A hybrid phase-field isogeometric analysis to crack propagation in porous functionally graded structures, Engineering with computers, 2023 [DOI: 10.1007/s00366-021-01518-0][COBISS: 202623235]
H. Minh, T. Sang-To, G. Theraulaz, M. Abdel Wahab, T. Cuong-Le;
Termite life cycle optimizer, Expert systems with applications, vol. 213, [article no.] 119211, 2023 [DOI: 10.1016/j.eswa.2022.119211][COBISS: 201110275]
T. Nguyen, M. Kikumoto, H. Nguyen-Xuan, M. Abdel Wahab, T. Cuong-Le;
Optimization of artificial neutral networks architecture for predicting compression parameters using piezocone penetration test, Expert systems with applications, 2023 [DOI: 10.1016/j.eswa.2023.119832][COBISS: 201524483]
C. Wang, K. Fan, C. Li, M. Abdel Wahab;
Prediction of the effect of shot peening residual stress on fretting fatigue behaviour, International journal of fatigue, 2023 [DOI: 10.1016/j.ijfatigue.2023.107909][COBISS: 201150467]
S. Han, C. Wang, S. Khatir, Y. Ling, D. Wang, M. Abdel Wahab;
A deep neural network approach combined with Findley parameter to predict fretting fatigue crack initiation lifetime, International journal of fatigue, 2023 [DOI: 10.1016/j.ijfatigue.2023.107891][COBISS: 201193219]
C. Wang, W. Zhang, C. Li, D. Wang, M. Abdel Wahab;
Two-scale analysis of fretting fatigue crack initiation in heterogeneous materials using continuum damage mechanics, International Journal of Solids and Structures, vol. 269, 2023 [DOI: 10.1016/j.ijsolstr.2023.112215][COBISS: 201487363]
J. Bai, Y. Li, M. Zheng, S. Khatir, M. Abdel Wahab;
A Sinh Cosh optimizer, Knowledge-based systems, 2023 [DOI: 10.1016/j.knosys.2023.111081][COBISS: 201146883]
S. Han, M. Lezaack, G. Pyka, M. Abdel Wahab, F. Hannard;
On the competition between intergranular and transgranular failure within 7xxx Al alloys with tailored microstructures, Materials, vol. 16, 2023 [DOI: 10.3390/ma16103770][COBISS: 201371139]
N. Fahem, I. Belaidi, A. Oulad Brahim, M. Abdel Wahab;
A new methodology to predict the sequence of GFRP layers using machine learning and JAYA algorithm, Mechanics of materials, 2023 [DOI: 10.1016/j.mechmat.2023.104692][COBISS: 201316355]
B. Dang, H. Nguyen-Xuan, M. Abdel Wahab;
An effective approach for VARANS-VOF modelling interactions of wave and perforated breakwater using gradient boosting decision tree algorithm, Ocean engineering, 2023 [DOI: 10.1016/j.oceaneng.2022.113398][COBISS: 201777923]
Z. Li, Y. Zhou, X. Liu, M. Abdel Wahab;
Service reliability assessment of ballastless track in high speed railway via improved response surface method, Reliability engineering & systems safety, 2023 [DOI: 10.1016/j.ress.2023.109180][COBISS: 201543427]
C. Li, R. Karimbaev, M. Abdel Wahab;
Fretting wear behavior of Inconel 718 alloy manufactured by DED and treated by UNSM, Scientific reports, 2023 [DOI: 10.1038/s41598-023-28128-8][COBISS: 201763587]
H. Tran-Ngoc, T. Le-Xuan, S. Khatir, M. Abdel Wahab;
A promising approach using fibonacci sequence-based optimization algorithms and advanced computing, Scientific reports, 2023 [DOI: 10.1038/s41598-023-28367-9][COBISS: 201306371]
Y. Ling, J. Ni, M. Abdel Wahab;
Numerical prediction of microstructure and hardness for low carbon steel wire Arc additive manufacturing components, Simulation modelling practice and theory, 2023 [DOI: 10.1016/j.simpat.2022.102664][COBISS: 201867011]
2022
T. Sang-To, H. Minh, S. Mirjalili, M. Abdel Wahab, T. Cuong-Le;
A new movement strategy of grey wolf optimizer for optimization problems and structural damage identification, Advances in engineering software, 2022 [DOI: 10.1016/j.advengsoft.2022.103276][COBISS: 198912259]
A. Rudawska, M. Abdel Wahab, M. Müller, D. Stančeková;
Mechanical properties and leak-tightness of polymeric pipe adhesive joints, Applied mechanics, vol. 3, 2022 [DOI: 10.3390/applmech3010004][COBISS: 202628099]
T. Cuong-Le, H. Minh, M. Abdel Wahab;
A novel version of grey wolf optimizer based on a balance function and its application for hyperparameters optimization in deep neural network (DNN) for structural damage identification, Engineering failure analysis, 2022 [DOI: 10.1016/j.engfailanal.2022.106829][COBISS: 204978691]
L. Nguyen-Ngoc, H. Ngoc Ai Tran, S. Khatir, M. Abdel Wahab;
Damage assessment of suspension footbridge using vibration measurement data combined with a hybrid bee-genetic algorithm, Scientific reports, 2022 [DOI: 10.1038/s41598-022-24445-6][COBISS: 204990211]
A. Can Kocabıçak, M. Abdel Wahab;
Multiphysics numerical modelling of backward flow forming process of AISI 5140 steel, Simulation modelling practice and theory, 2022 [DOI: 10.1016/j.simpat.2022.102656][COBISS: 205129731]
M. Mousavi, A. Gandomi, M. Abdel Wahab, B. Glisic;
Monitoring onsite-temperature prediction error forcondition monitoring of civil infrastructures, Structural control & health monitoring, vol. 29, 2022 [DOI: 10.1002/stc.3112][COBISS: 205116163]
A. Oulad Brahim, I. Belaidi, N. Fahem, M. Abdel Wahab;
Prediction of the peak load and crack initiation energy of dynamic brittle fracture in X70 steel pipes using an improved artificial neural network and extended finite element method, Theoretical and applied fracture mechanics, 2022 [DOI: 10.1016/j.tafmec.2022.103627][COBISS: 205008899]
C. Wang, C. Li, Y. Ling, M. Abdel Wahab;
Investigation on fretting fatigue crack initiation in heterogenous materials using a hybrid of multiscale homogenization and direct numerical simulation, Tribology international, 2022 [DOI: 10.1016/j.triboint.2022.107470][COBISS: 205137667]
C. Wang, D. Wang, M. Abdel Wahab;
Fretting fatigue crack initiation behaviour in heterogeneous materials under out-of-phase loading, Tribology international, 2022 [DOI: 10.1016/j.triboint.2022.107571][COBISS: 205139459]
C. Wang, Y. Li, H. Tran-Ngoc, D. Wang, S. Khatir, M. Abdel Wahab;
Artificial neural network combined with damage parameters to predict fretting fatigue crack initiation lifetime, Tribology international, 2022 [DOI: 10.1016/j.triboint.2022.107854][COBISS: 205140995]
2021
A. Rudawska, M. Abdel Wahab;
Mechanical properties of adhesive joints made with pressure-sensitive adhesives, Strojniški vestnik = Journal of mechanical engineering, vol. 67, 2021 [DOI: 10.5545/sv-jme.2021.7253][COBISS: 76907779]
H. Minh, S. Khatir, M. Abdel Wahab, T. Cuong-Le;
An enhancing particle swarm optimization algorithm (EHVPSO) for damage identification in 3D transmission tower, Engineering structures, 2021 [DOI: 10.1016/j.engstruct.2021.112412][COBISS: 200134403]
B. Dang, H. Nguyen-Xuan, M. Abdel Wahab;
Numerical study on wave forces and overtopping over various seawall structures using advanced SPH-based method, Engineering structures, 2021 [DOI: 10.1016/j.engstruct.2020.111349][COBISS: 200269315]
M. Abdel Wahab;
FFW 2021 : the 9th International Conference on Fracture Fatigue and Wear (FFW 2021), August 2-3, 2021, Online via MS Teams, 2021 [COBISS: 85337859]
2020
D. Nguyen-Le, Q. Tao, V. Nguyen, M. Abdel Wahab, H. Nguyen-Xuan;
A data-driven approach based on long short-term memory and hidden Markov model for crack propagation prediction, Engineering fracture mechanics, 2020 [DOI: 10.1016/j.engfracmech.2020.107085][COBISS: 197748739]
H. Tran-Ngoc, L. He, G. De Roeck, M. Abdel Wahab;
An efficient approach to model updating for a multispan railway bridge using orthogonal diagonalization combined with improved particle swarm optimization, Journal of sound and vibration, 2020 [DOI: 10.1016/j.jsv.2020.115315][COBISS: 200116483]
A. Rudawska, M. Abdel Wahab, M. Müller;
Effect of ageing process on mechanical properties of adhesive tubular butt joints in aqueous environment, International Journal of Adhesion and Adhesives, 2020 [DOI: 10.1016/j.ijadhadh.2019.102466][COBISS: 201016579]
B. Bozyigit, Y. Yesilce, M. Abdel Wahab;
Transfer matrix formulations and single variable shear deformation theory for crack detection in beam-like structures, Structural engineering and mechanics, vol. 73, 2020 [DOI: 10.12989/sem.2020.73.2.109][COBISS: 200013571]
B. Bozyigit, Y. Yesilce, M. Abdel Wahab;
Free vibration and harmonic response of cracked frames using a single variable shear deformation theory, Structural engineering and mechanics, vol. 74, 2020 [DOI: 10.12989/sem.2020.74.1.033][COBISS: 200010499]
K. Nguyen, C. Augarde, W. Coombs, H. Nguyen-Xuan, M. Abdel Wahab;
Non-conforming multipatches for NURBS-based finite element analysis of higher-order phase-field models for brittle fracture, Engineering fracture mechanics, 2020 [DOI: 10.1016/j.engfracmech.2020.107133][COBISS: 204073731]
K. Pereira, M. Abdel Wahab;
Fretting fatigue lifetime estimation using a cyclic cohesive zone model, Tribology international, 2020 [DOI: 10.1016/j.triboint.2019.105899][COBISS: 204994051]
Q. Deng, N. Bhatti, X. Yin, M. Abdel Wahab;
The effect of a critical micro-void defect on fretting fatigue crack initiation in heterogeneous material using a multiscale approach, Tribology international, 2020 [DOI: 10.1016/j.triboint.2019.105909][COBISS: 204996611]
S. Wang, S. Khatir, M. Abdel Wahab;
Proper orthogonal decomposition for the prediction of fretting wear characteristics, Tribology international, 2020 [DOI: 10.1016/j.triboint.2020.106545][COBISS: 204999171]
2019
A. Rudawska, M. Abdel Wahab;
The effect of cataphoretic and powder coatings on the strength and failure modes of EN AW-5754 aluminium alloy adhesive joints, International Journal of Adhesion and Adhesives, 2019 [DOI: 10.1016/j.ijadhadh.2018.11.005][COBISS: 201018627]
G. Gillich, H. Furdui, M. Abdel Wahab, Z. Korka;
A robust damage detection method based on multi-modal analysis in variable temperature conditions, Mechanical systems and signal processing, 2019 [DOI: 10.1016/j.ymssp.2018.05.037][COBISS: 200002051]
D. Nguyen, T. Bui, G. De Roeck, M. Abdel Wahab;
Damage detection in Ca-Non Bridge using transmissibility and artificial neural networks, Structural engineering and mechanics, vol. 71, 2019 [DOI: 10.12989/sem.2019.71.2.175][COBISS: 200017923]
N. Bhatti, K. Pereira, M. Abdel Wahab;
Effect of stress gradient and quadrant averaging on fretting fatigue crack initiation angle and life, Tribology international, 2019 [DOI: 10.1016/j.triboint.2018.10.036][COBISS: 204992515]
B. Dang, H. Nguyen-Ngoc, T. Hoang, H. Nguyen-Xuan, M. Abdel Wahab;
Numerical investigation of novel prefabricated hollow concrete blocks for stepped-type seawall structures, Engineering structures, 2019 [DOI: 10.1016/j.engstruct.2019.109558][COBISS: 200271619]
G. Kosec, J. Slak, M. Depolli, R. Trobec, K. Pereira, S. Tomar, T. Jacquemin, S. Bordas, M. Abdel Wahab;
Weak and strong from meshless methods for linear elastic problem under frettingcontact conditions, Tribology international, vol. 138, 2019 [DOI: 10.1016/j.triboint.2019.05.041][COBISS: 32424999] ::
2018
W. Zhang, X. Wang, X. Li, J. Gong, M. Abdel Wahab;
Influence of prior low cycle fatigue on microstructure evolution and subsequent creep behavior, International journal of fatigue, 2018 [DOI: 10.1016/j.ijfatigue.2018.01.001][COBISS: 201221635]
J. Ni, X. Wang, J. Gong, M. Abdel Wahab;
A multi-phase model for transformation plasticity using thermodynamics-based metallurgical algorithm, International journal of mechanical sciences, 2018 [DOI: 10.1016/j.ijmecsci.2018.08.025][COBISS: 201680131]
S. Tiachacht, A. Bouazzouni, S. Khatir, M. Abdel Wahab, A. Behtani, R. Capozucca;
Damage assessment in structures using combination of a modified Cornwell indicator and genetic algorithm, Engineering structures, 2018 [DOI: 10.1016/j.engstruct.2018.09.070][COBISS: 200274691]
C. Thai, A. Ferreira, M. Abdel Wahab, H. Nguyen-Xuan;
A moving Kriging meshfree method with naturally stabilized nodal integration for analysis of functionally graded material sandwich plates, Acta mechanica, vol. 229, 2018 [DOI: 10.1007/s00707-018-2156-9][COBISS: 204069379]
M. Djafri, M. Bouchetara, M. Abdel Wahab;
Influence of thermal fatigue on the wear behaviour of brake discs sliding against organic and semi-metallic friction materials, Tribology transactions, vol. 61, 2018 [DOI: 10.1080/10402004.2018.1437491][COBISS: 204284931]
2017
J. Martínez, L. Vanegas-Useche, M. Abdel Wahab;
Numerical prediction of fretting fatigue crack trajectory in a railway axle using XFEM, International journal of fatigue, vol. 100, 2017 [DOI: 10.1016/j.ijfatigue.2017.03.009][COBISS: 204283907]
M. Depolli, R. Trobec, G. Kosec, K. Pereira, M. Abdel Wahab, S. Tomar, P. Bordas;
Parallel performance of abaqus software for simulation of fretting fatigue, Proceedings of the Fifth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, PARENG 2017, 30-31 May 2017, Pécs, Hungary, 2017 [COBISS: 30529575]
Y. Zhou, M. Abdel Wahab;
Cosine based and extended transmissibility damage indicators for structural damage detection, Engineering structures, 2017 [DOI: 10.1016/j.engstruct.2017.03.030][COBISS: 200277251]
J. Ni, M. Abdel Wahab;
A numerical kinematic model of welding process for low carbon steels, Computers & Structures, vol. 186, 2017 [DOI: /10.1016/j.compstruc.2017.03.009][COBISS: 204281859]
H. Alali, L. Braeckman, T. Van Hecke, B. De Clercq, H. Janssens, M. Abdel Wahab;
Relationship between non-standard work arrangements and work-related accident absence in Belgium, Journal of occupational health, vol. 59, 2017 [DOI: 10.1539/joh.16-0119-OA][COBISS: 204286723]
H. Cao, Y. Zhou, Z. Chen, M. Abdel Wahab;
Form-finding analysis of suspension bridges using an explicit iterative approach, Structural engineering and mechanics, vol. 62, 2017 [DOI: 10.12989/sem.2017.62.1.085][COBISS: 200023811]
N. Bhatti, M. Abdel Wahab;
Finite element analysis of fretting fatigue under out of phase loading conditions, Tribology international, 2017 [DOI: 10.1016/j.triboint.2017.01.022][COBISS: 204456707]
T. Yue, M. Abdel Wahab;
Finite element analysis of fretting wear under variable coefficient of friction and different contact regimes, Tribology international, 2017 [DOI: 10.1016/j.triboint.2016.11.044][COBISS: 204443139]
D. Kumar Pokkalla, R. Biswas, L. Hien Poh, M. Abdel Wahab;
Fretting fatigue stress analysis in heterogeneous material using direct numerical simulations in solid mechanics, Tribology international, 2017 [DOI: 10.1016/j.triboint.2016.12.033][COBISS: 204453635]
K. Pereira, M. Abdel Wahab;
Fretting fatigue crack propagation lifetime prediction in cylindrical contact using an extended MTS criterion for non-proportional loading, Tribology international, 2017 [DOI: 10.1016/j.triboint.2017.06.026][COBISS: 204991235]
K. Pereira, T. Yue, M. Abdel Wahab;
Multiscale analysis of the effect of roughness on fretting wear, Tribology international, 2017 [DOI: 10.1016/j.triboint.2017.02.024][COBISS: 204458499]
2016
G. Gillich, M. Abdel Wahab, R. Yan, J. Araújo dos Santos;
Damage models and assessment methods, Shock and vibration, 2016 [DOI: 10.1155/2016/1748712][COBISS: 205955331]
K. Pereira, S. Bordas, S. Tomar, R. Trobec, M. Depolli, G. Kosec, M. Abdel Wahab;
On the convergence of stresses in fretting fatigue, Materials, vol. 9, 2016 [DOI: 10.3390/ma9080639][COBISS: 29649703] ::
G. Gillich, Z. Praisach, M. Abdel Wahab, N. Gillich, I. Mituletu, C. Nitescu;
Free vibration of a perfectly clamped-free beam with stepwise eccentric distributed masses, Shock and vibration, 2016 [DOI: 10.1155/2016/2086274][COBISS: 205961219]
C. Thai, A. Ferreira, M. Abdel Wahab, H. Nguyen-Xuan;
A generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates based on isogeometric analysis, Acta mechanica, vol. 227, 2016 [DOI: 10.1007/s00707-015-1547-4][COBISS: 204070403]
2015
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Determination of the Rayleigh damping coefficients of steel bristles and clusters of bristles of gutter brushes = Determinación de los coeficientes de amortiguamiento de Rayleigh de cerdas y grupos de cerdas de acero de cepillos laterales, Dyna, vol. 82, 2015 [DOI: 10.15446/dyna.v82n194.49647][COBISS: 204180739]
C. Wang, Q. Sun, M. Abdel Wahab, X. Zhang, L. Xu;
Regression modeling and prediction of road sweeping brush load characteristics from finite element analysis and experimental results, Waste Management, 2015 [DOI: 10.1016/j.wasman.2015.06.027][COBISS: 201810435]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Effectiveness of oscillatory gutter brushes in removing street sweeping waste, Waste Management, 2015 [DOI: 10.1016/j.wasman.2015.05.014][COBISS: 201691395]
X. Chen, M. Abdel Wahab, G. Fekete;
Fatigue failure analysis for bolt-nut connections having slight pitch differences using experimental and finite element methods, Acta polytechnica Hungarica, vol. 12, 2015 [COBISS: 204395267]
2014
M. Abdel Wahab;
The mechanics of adhesives in composite and metal joints : finite element analysis with ANSYS, 2014 [COBISS: 205797891]
M. Abdel Wahab, N. Noda;
Advances in finite element analysis for computational mechanics, Advances in mechanical engineering, 2014 [DOI: 10.1155/2014/504965][COBISS: 205789443]
G. Fekete, B. Málnási Csizmadia, M. Abdel Wahab, P. De Baets, L. Vanegas-Useche, I. Bíró;
Patellofemoral model of the knee joint under non-standard squatting = Modelo patelofemoral de la articulación de la rodilla bajo sentadilla no estándar, Dyna, vol. 81, 2014 [DOI: 10.15446/dyna.v81n183.36171][COBISS: 204201219]
G. Gillich, Z. Praisach, M. Abdel Wahab, O. Vasile;
Localization of transversal cracks in sandwich beams and evaluation of their severity, Shock and vibration, 2014 [DOI: 10.1155/2014/607125][COBISS: 205952515]
R. Hojjati-Talemi, M. Abdel Wahab, J. De Pauw, P. De Baets;
Prediction of fretting fatigue crack initiation and propagation lifetime for cylindrical contact configuration, Tribology international, 2014 [DOI: 10.1016/j.triboint.2014.02.017][COBISS: 204441347]
2013
R. Hojjati-Talemi, M. Abdel Wahab, E. Giner, M. Sabsabi;
Numerical estimation of fretting fatigue lifetime using damage and fracture mechanics, Tribology letters, vol. 52, 2013 [DOI: 10.1007/s11249-013-0189-8][COBISS: 205781763]
T. Hafiz, M. Abdel Wahab, A. Crocombe, P. Smith;
Mixed-mode fatigue crack growth in FM73 bonded joints, International Journal of Adhesion and Adhesives, 2013 [DOI: 10.1016/j.ijadhadh.2012.07.004][COBISS: 201021187]
G. Fekete, B. Málnási Csizmadia, M. Abdel Wahab, P. De Baets;
Experimental determination of horizontal motion of human center of gravity during squatting, Experimental techniques, vol. 37, 2013 [DOI: 10.1111/j.1747-1567.2011.00768.x][COBISS: 204424963]
B. Sobhani Aragh, A. Zeighami, M. Rafiee, M. Yas, M. Abdel Wahab;
3-D thermo-elastic solution for continuously graded isotropic and fiber-reinforced cylindrical shells resting on two-parameter elastic foundations, Applied mathematical modelling, vol. 37, 2013 [DOI: 10.1016/j.apm.2013.01.005][COBISS: 205149443]
R. Hojjati-Talemi, M. Abdel Wahab;
Fretting fatigue crack initiation lifetime predictor tool : using damage mechanics approach, Tribology international, 2013 [DOI: 10.1016/j.triboint.2012.10.028][COBISS: 204439555]
2012
R. Hojjati-Talemi, M. Abdel Wahab;
Finite element analysis of localized plasticity in Al 2024-T3 subjected to fretting fatigue, Tribology transactions, vol. 55, 2012 [DOI: 10.1080/10402004.2012.711436][COBISS: 204280835]
R. Hojjati-Talemi, M. Abdel Wahab, P. De Baets;
Numerical investigation into the effect of contact geometry on fretting fatigue crack propagation lifetime, Tribology transactions, vol. 55, 2012 [DOI: 10.1080/10402004.2012.658987][COBISS: 204276227]
G. Fekete, P. De Baets, M. Abdel Wahab, B. Málnási Csizmadia, G. Katona, L. Vanegas-Useche, J. Solanilla;
Sliding-rolling ratio during deep squat with regard to different knee prostheses, Acta polytechnica Hungarica, vol. 9, 2012 [COBISS: 204392963]
2011
M. Abdel Wahab, C. Wang, L. Vanegas-Useche, G. Parker;
Experimental determination of optimum gutter brush parameters and road sweeping criteria for different types of waste, Waste Management, vol. 31, 2011 [DOI: 10.1016/j.wasman.2010.12.014][COBISS: 201808899]
M. Abdel Wahab, I. Hilmy, I. Ashcroft, A. Crocombe;
Damage parameters of adhesive joints with general triaxiality. Part 2, Scarf joint analysis, Journal of adhesion science and technology, vol. 25, 2011 [DOI: 10.1163/016942410X533363][COBISS: 199247619]
M. Abdel Wahab, I. Hilmy, I. Ashcroft, A. Crocombe;
Damage parameters of adhesive joints with general triaxiality. Part 1, Finite element analysis, Journal of adhesion science and technology, vol. 25, 2011 [DOI: 10.1163/016942410X534939][COBISS: 199247107]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Dynamic finite element model of oscillatory brushes, Finite elements in analysis and design, vol. 47, 2011 [DOI: 10.1016/j.finel.2011.02.008][COBISS: 198922243]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Modeling of an oscillatory freely-rotating cutting brush for street sweeping = Modelado de un cepillo oscilatorio para barrido de calles en rotación libre, Dyna, vol. 78, 2011 [COBISS: 204179203]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Determination of friction coefficients, brush contact arcs and brush penetrations for gutter brush–road interaction through FEM, Acta mechanica, vol. 221, 2011 [DOI: 10.1007/s00707-011-0490-2][COBISS: 201841411]
2010
J. Van Wittenberghe, J. De Pauw, M. Abdel Wahab, G. De Roeck, T. Bui;
Fatigue investigation of threaded pipe connections, Sustainable construction & design, vol. 1, 2010 [DOI: 10.21825/scad.v1i1.20424][COBISS: 201820163]
F. Jumbo, I. Ashcroft, A. Crocombe, M. Abdel Wahab;
Thermal residual stress analysis of epoxy bi-material laminates and bonded joints, International Journal of Adhesion and Adhesives, vol. 30, 2010 [DOI: 10.1016/j.ijadhadh.2010.03.009][COBISS: 201033731]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Effectiveness of gutter brushes in removing street sweeping waste, Waste Management, vol. 30, 2010 [DOI: 10.1016/j.wasman.2009.09.036][COBISS: 201693699]
M. Abdel Wahab, C. Wang, L. Vanegas-Useche, G. Parker;
Finite element models for brush-debris interaction in road sweeping, Acta mechanica, vol. 215, 2010 [DOI: 10.1007/s00707-010-0304-y][COBISS: 201837059]
M. Abdel Wahab, I. Hilmy, I. Ashcroft, A. Crocombe;
Evaluation of fatigue damage in adhesive bonding. Part 1, Bulk adhesive, Journal of adhesion science and technology, vol. 24, 2010 [DOI: 10.1163/016942409X12508517390798][COBISS: 199254275]
T. Hafiz, M. Abdel Wahab, A. Crocombe, P. Smith;
Mixed-mode fracture of adhesively bonded metallic joints under quasi-static loading, Engineering fracture mechanics, vol. 77, 2010 [DOI: 10.1016/j.engfracmech.2010.09.015][COBISS: 204071939]
M. Abdel Wahab, I. Hilmy, I. Ashcroft, A. Crocombe;
Evaluation of fatigue damage in adhesive bonding. Part 2, Single lap joint, Journal of adhesion science and technology, vol. 24, 2010 [DOI: 10.1163/016942409X12508517390833][COBISS: 199256323]
2009
V. Shenoy, I. Ashcroft, G. Critchlow, A. Crocombe, M. Abdel Wahab;
An investigation into the crack initiation and propagation behaviour of bonded single-lap joints using backface strain, International Journal of Adhesion and Adhesives, vol. 29, 2009 [DOI: 10.1016/j.ijadhadh.2008.07.008][COBISS: 201037315]
V. Shenoy, I. Ashcroft, G. Critchlow, A. Crocombe, M. Abdel Wahab;
An evaluation of strength wearout models for the lifetime prediction of adhesive joints subjected to variable amplitude fatigue, International Journal of Adhesion and Adhesives, vol. 29, 2009 [DOI: 10.1016/j.ijadhadh.2009.02.008][COBISS: 201038851]
V. Shenoy, I. Ashcroft, G. Critchlow, A. Crocombe, M. Abdel Wahab;
Strength wearout of adhesively bonded joints under constant amplitude fatigue, International journal of fatigue, vol. 31, 2009 [DOI: 10.1016/j.ijfatigue.2008.11.007][COBISS: 201355011]
W. Ceulemans, M. Abdel Wahab, K. De Proft, G. Wets;
Modelling traffic flow with constant speed using the Galerkin finite element method, WCECS 2009. [Vol. 2], 2009 [COBISS: 199920131]
2008
L. Vanegas-Useche, M. Abdel Wahab, J. Arroyave L.;
Determinación del coeficiente de fricción entre cerdas de acero de cepillos laterales para barrer calles = Determination of the coefficient of friction between steel bristles of gutter brushes for road sweeping, Scientia et technica, año 14, 2008 [COBISS: 201510403]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Effectividad de los cepillos laterales para barrido de calles = Effectiveness of gutter brushes for street sweeping, Scientia et technica, año 14, 2008 [DOI: 10.22517/23447214.3175][COBISS: 201508867]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Dynamics of a freely rotating cutting brush subjected to variable speed, International journal of mechanical sciences, vol. 50, 2008 [DOI: 10.1016/j.ijmecsci.2007.11.004][COBISS: 201682435]
Y. Hua, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive, International Journal of Adhesion and Adhesives, vol. 28, 2008 [DOI: 10.1016/j.ijadhadh.2007.08.005][COBISS: 201040899]
A. Crocombe, I. Ashcroft, M. Abdel Wahab;
Environmental degradation, 2008 [DOI: 10.1007/978-3-540-79056-3_8][COBISS: 199534595]
2007
M. Abdel Wahab, G. Parker, C. Wang;
Modelling rotary sweeping brushes and analyzing brush characteristic using finite element method, Finite elements in analysis and design, vol. 43, 2007 [DOI: 10.1016/j.finel.2006.12.003][COBISS: 201556227]
C. Liljedahl, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Modelling the environmental degradation of adhesively bonded aluminium and composite joints using a CZM approach, International Journal of Adhesion and Adhesives, vol. 27, 2007 [DOI: 10.1016/j.ijadhadh.2006.09.015][COBISS: 201042179]
Y. Hua, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Continuum damage modelling of environmental degradation in joints bonded with E32 epoxy adhesive, Journal of adhesion science and technology, vol. 21, 2007 [DOI: 10.1163/156856107780437444][COBISS: 199250691]
A. Graner Solana, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Fatigue initiation in adhesively-bonded single-lap joints, Journal of adhesion science and technology, vol. 21, 2007 [DOI: 10.1163/156856107782313629][COBISS: 199252227]
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Dynamics of an unconstrained oscillatory flicking brush for road sweeping, Journal of sound and vibration, vol. 307, 2007 [DOI: 10.1016/j.jsv.2007.07.010][COBISS: 201560323]
2006
L. Vanegas-Useche, M. Abdel Wahab, G. Parker;
Dinámica de cepillos laterales para barrido de calles, Scientia et technica, año 12, 2006 [COBISS: 201380099]
C. Liljedahl, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Damage modelling of adhesively bonded joints, International journal of fracture, vol. 141, 2006 [DOI: 10.1007/s10704-006-0072-9][COBISS: 201521923]
A. Crocombe, Y. Hua, W. Loh, M. Abdel Wahab, I. Ashcroft;
Predicting the residual strength for environmentally degraded adhesive lap joints, International Journal of Adhesion and Adhesives, vol. 26, 2006 [DOI: 10.1016/j.ijadhadh.2005.04.003][COBISS: 201547779]
M. Abdel Wahab, D. Mahboub;
Students understanding and participation using ULearn : dynamics case, European journal of engineering education, vol. 31, 2006 [DOI: 10.1080/03043790600676232][COBISS: 201528579]
L. Vanegas-Useche, G. Parker, M. Abdel Wahab;
Desarrollos recientes en equipos de barrido de calles, Scientia et technica, año 12, 2006 [COBISS: 201385987]
Y. Hua, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Modelling environmental degradation in EA9321-bonded joints using a progressive damage failure model, The journal of adhesion, vol. 82, 2006 [DOI: 10.1080/00218460600559557][COBISS: 200864259]
2005
L. Vanegas-Useche, M. Abdel Wahab;
Effectividad de las barredoras de calles para remover contaminantes de las vías, Scientia et technica, año 11, 2005 [COBISS: 201369859]
C. Liljedahl, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
The effect of residual strains on the progressive damage modelling of environmentally degraded adhesive joints, Journal of adhesion science and technology, vol. 19, 2005 [DOI: 10.1163/1568561054352513][COBISS: 198961923]
W. Loh, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive, International Journal of Adhesion and Adhesives, vol. 25, 2005 [DOI: 10.1016/j.ijadhadh.2004.02.002][COBISS: 201011715]
2004
S. Erpolat, I. Ashcroft, A. Crocombe, M. Abdel Wahab;
On the analytical determination of strain energy release rate in bonded DCB joints, Engineering fracture mechanics, vol. 71, 2004 [DOI: 10.1016/S0013-7944(03)00163-2][COBISS: 198014723]
M. Abdel Wahab, I. Ashcroft, A. Crocombe, P. Smith;
Finite element prediction of fatigue crack propagation lifetime in composite bonded joints, Composites. Part A, Applied Science and Manufacturing, vol. 35, 2004 [DOI: 10.1016/j.compositesa.2003.10.002][COBISS: 201250563]
S. Erpolat, I. Ashcroft, A. Crocombe, M. Abdel Wahab;
Fatigue crack growth acceleration due to intermittent overstressing in adhesively bonded CFRP joints, Composites. Part A, Applied Science and Manufacturing, vol. 35, 2004 [DOI: 10.1016/j.compositesa.2004.03.002][COBISS: 201248003]
S. Erpolat, I. Ashcroft, A. Crocombe, M. Abdel Wahab;
A study of adhesively bonded joints subjected to constant and variable amplitude fatigue, International journal of fatigue, vol. 26, 2004 [DOI: 10.1016/j.ijfatigue.2004.03.011][COBISS: 201364227]
2003
I. Ashcroft, M. Abdel Wahab, A. Crocombe;
Predicting degradation in bonded composite joints using a semi-coupled finite-element method, Mechanics of advanced materials and structures, vol. 10, 2003 [DOI: 10.1080/15376490306744][COBISS: 201340419]
A. Al-Ghamdi, I. Ashcroft, A. Crocombe, M. Abdel Wahab;
Crack growth in adhesively bonded joints subjected to variable frequency fatigue loading, The journal of adhesion, vol. 79, 2003 [DOI: 10.1080/714906165][COBISS: 201346563]
W. Loh, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Modelling interfacial degradation using interfacial rupture elements, The journal of adhesion, vol. 79, 2003 [DOI: 10.1080/714906160][COBISS: 200866307]
2002
W. Loh, A. Crocombe, M. Abdel Wahab, I. Ashcroft;
Environmental degradation of the interfacial fracture energy in an adhesively bonded joint, Engineering fracture mechanics, vol. 69, 2002 [DOI: 10.1016/S0013-7944(02)00004-8][COBISS: 198020099]
M. Abdel Wahab, I. Ashcroft, A. Crocombe, P. Smith;
Numerical prediction of fatigue crack propagation lifetime in adhesively bonded structures, International journal of fatigue, vol. 24, 2002 [DOI: 10.1016/S0142-1123(01)00173-6][COBISS: 200881411]
W. Loh, A. Crocombe, M. Abdel Wahab, J. Watts, I. Ashcroft;
The effect of moisture on the failure locus and fracture energy of an epoxy–steel interface, Journal of adhesion science and technology, vol. 16, 2002 [DOI: 10.1163/156856102320252877][COBISS: 198958851]
A. Crocombe, C. Ong, C. Chan, M. Abdel Wahab, I. Ashcroft;
Investigating fatigue damage evolution in adhesively bonded structures using backface strain measurement, The journal of adhesion, vol. 78, 2002 [DOI: 10.1080/00218460213835][COBISS: 200871939]
M. Abdel Wahab, A. Crocombe, A. Beevers, K. Ebtehaj;
Coupled stress-diffusion analysis for durability study in adhesively bonded joints, International Journal of Adhesion and Adhesives, vol. 22, 2002 [DOI: 10.1016/S0143-7496(01)00037-9][COBISS: 200878339]
2001
I. Ashcroft, M. Abdel Wahab, A. Crocombe, D. Hughes, S. Shaw;
The effect of environment on the fatigue of bonded composite joints. Part 1, Testing and fractography, Composites. Part A, Applied Science and Manufacturing, vol. 32, 2001 [DOI: 10.1016/S1359-835X(00)00131-7][COBISS: 201227011]
M. Abdel Wahab, I. Ashcroft, A. Crocombe, D. Hughes, S. Shaw;
The effect of environment on the fatigue of bonded composite joints. Part 2, Fatigue threshold prediction, Composites. Part A, Applied Science and Manufacturing, vol. 32, 2001 [DOI: 10.1016/S1359-835X(00)00132-9][COBISS: 201229059]
M. Abdel Wahab, I. Ashcroft, A. Crocombe, S. Shaw;
Prediction of fatigue thresholds in adhesively bonded joints using damage mechanics and fracture mechanics, Journal of adhesion science and technology, vol. 15, 2001 [DOI: 10.1163/15685610152540830][COBISS: 198956291]
I. Ashcroft, D. Hughes, S. Shaw, M. Abdel Wahab, A. Crocombe;
Effect of temperature on the quasi-static strength and fatigue resistance of bonded composite double lap joints, The journal of adhesion, vol. 75, 2001 [DOI: 10.1080/00218460108029594][COBISS: 200845571]
M. Abdel Wahab, I. Ashcroft, A. Crocombe, S. Shaw;
Diffusion of moisture in adhesively bonded joints, The journal of adhesion, vol. 77, 2001 [DOI: 10.1080/00218460108030731][COBISS: 200288771]
M. Abdel Wahab;
Effect of modal curvatures on damage detection using model updating, Mechanical systems and signal processing, vol. 15, 2001 [DOI: 10.1006/mssp.2000.1340][COBISS: 200004611]
2000
M. Abdel Wahab;
On the use of fracture mechanics in designing a single lap adhesive joint, Journal of adhesion science and technology, vol. 14, 2000 [DOI: 10.1163/15685610051066758][COBISS: 198952451]
J. Maeck, M. Abdel Wahab, B. Peeters, G. De Roeck, W. De Wilde, J. Vantomme;
Damage identification in reinforced concrete structures by dynamic stiffness determination, Engineering structures, vol. 22, 2000 [DOI: 10.1016/S0141-0296(99)00074-7][COBISS: 200122883]
J. Ndambi, B. Peeters, M. Abdel Wahab, G. De Roeck, W. De Wilde;
Comparison of techniques for modal analysis of concrete structures, Engineering structures, vol. 22, 2000 [DOI: 10.1016/S0141-0296(99)00054-1][COBISS: 200119811]
1999
M. Abdel Wahab, G. De Roeck;
An effective method for selecting physical modes by vector autoregressive models, Mechanical systems and signal processing, vol. 13, 1999 [DOI: 10.1006/mssp.1998.0193][COBISS: 199930115]
M. Abdel Wahab, G. De Roeck;
Damage detection in bridges using modal curvatures : application to a real damage scenario, Journal of sound and vibration, vol. 226, 1999 [DOI: 10.1006/jsvi.1999.2295][COBISS: 200110851]
M. Abdel Wahab, G. De Roeck, B. Peeters;
Parameterization of damage in reinforced concrete structures using model updating, Journal of sound and vibration, vol. 228, 1999 [DOI: 10.1006/jsvi.1999.2448][COBISS: 200112643]
1997
M. Abdel Wahab, G. De Roeck;
Effect of temperature on dynamic system parameters of a highway bridge, Structural engineering international, vol. 7, 1997 [DOI: 10.2749/101686697780494563][COBISS: 198926851]
M. Abdel Wahab, G. De Roeck;
A fracture mechanics approach for designing an adhesive joint for glass fibre-reinforced pipes, Journal of adhesion science and technology, vol. 11, 1997 [DOI: 10.1163/156856197X00688][COBISS: 198950659]
1996
M. Abdel Wahab, G. De Roeck;
A family of elements with [lambda] singularity, Advances in engineering software, vol. 26, 1996 [DOI: 10.1016/0965-9978(95)00113-1][COBISS: 198626051]
M. El-Hawary, A. Ragab, M. Abdel Wahab;
A nonlinear finite element analysis of horizontal elastomerics of revolution, Finite elements in analysis and design, vol. 21, 1996 [DOI: 10.1016/0168-874X(95)00033-P][COBISS: 198917123]
M. Abdel Wahab, G. De Roeck;
A finite element solution for elliptical cracks using the ICCI method, Engineering fracture mechanics, vol. 53, 1996 [DOI: 10.1016/0013-7944(95)00163-8][COBISS: 197741315]
1995
G. De Roeck, M. Abdel Wahab;
Strain energy release rate formulae for 3D finite element, Engineering fracture mechanics, vol. 50, 1995 [DOI: 10.1016/0013-7944(94)00232-7][COBISS: 199525635]